Rockin News Recent Ads

Trade Shows!

Once again, T&D Machine Products will be available at the major trade shows, not only displaying the latest in shaft-mount roller rocker technology, but onsite for your questions, comments and bench racing. Don’t miss us! We’ll be at the following shows:

National Parts Peddler Trade Show (NPP), November 18-20 Syracuse, New York
Performance Racing Industry (PRI), December 1-3, Orlando, Florida
International Motorsports Industry Show (IMIS), December 8-10, Indianapolis, Indiana


She’s Real Fine

With an aluminum replacement head available for the venerable 409 Chevy from Edelbrock, T&D felt the need to build a superb shaft-mount roller rocker system to fit it.

New Rocker Set Fits Edelbrock 409 Aluminum Head!

T&D Machine Products, manufacturers of the finest in shaft-mount rocker arm technology, has made available a roller rocker system for the Edelbrock 348/409 cylinder head.

This set uses a substantially more rigid one-piece mounting stand that 
encompasses both intake and exhaust rockers. Sound engineering is behind 
this rigid one-piece stand that requires zero machining – it is an 
absolute bolt on. The T&D one-piece stand not only makes for a rock-solid mounting spot for improved valve train stability and valve lash consistency but 
acts as a cylinder head girdle to increase valve guide and spring life, even in 
the most extreme lift/duration environment.  Available with ratios through 
1.8, ask for p/n 3005.

Besides the 348/408 set, T&D builds rocker systems for the Edelbrock 
Oldsmobile, Pontiac and Ford FE are also available


T&D’s Better Idea

When Edelbrock came up with an aluminum replacement head  for the FE Ford, T&D was quick to engineer a shaft-mount roller rocker system to fit.

T&D Rocker Set Fits Edelbrock FE Aluminum Head!


T&D Machine Products, manufacturers of the finest in shaft-mount rocker arm technology, has made available an all-new shaft-mount roller rocker system for the Edelbrock FE Ford cylinder head. 

Sound engineering is behind this new system, including correcting OEM geometry and giving more rigidity to make the rocker platform more stable. The rocker arms are full rollers, with roller bearing tips and trunions, and the shafts are case hardened. This T&D set is an absolute bolt on, with zero machining required, and it clears the head studs/nuts and stock valve covers. 

Spacers are graphite-impregnated nylon, for ease of maintenance and longevity, and the set is supplied with ARP attaching hardware.

Available with 1.76 ratio, ask for p/n 7022.

Besides the FE set, T&D builds rocker systems for the Edelbrock Oldsmobile, Pontiac and Chevrolet 348/409, and over 400 other cylinder heads, both OEM and aftermarket. 


We are currently building our brand new website! Please select your make below or use the catalog. If you have any questions please give us a call at 775-884-2292


Recent Ads